NEFF C17UR02N0, Инструкция по эксплуатации

Страница: 12 / 24

en
Timer
12
5.
Touch the
#
touch button.
The appliance starts the operation. The cooking time
counts down on the display.
Notes
■
When you switch on the appliance, the highest
microwave output always appears in the display as a
suggestion.
■
If you open the appliance door when the appliance
is in use, the fan may continue to run.
Cooking time elapsed
An audible signal sounds.
Operation has finished.
Stopping the audible signal early:
Touch the
0
touch button.
Note:
After touching the
0
touch button, the timer
function appears; after a short time, it automatically
disappears. If you touch the
0
touch button again, the
timer function will disappear instantly.
Use the
#
touch button to switch off the appliance.
Changing the cooking time
This can be done at any time.
Use the
(
or
)
touch button to change the cooking time.
The operation continues.
Changing the microwave output
This can be done at any time.
Use the
%
touch button to change the microwave
output.
Use the
(
or
)
touch button to set the required
microwave output.
The cooking time remains unchanged.
The operation continues.
Note:
If the set cooking time exceeds the maximum
time for the microwave output of 900 W, it is reduced
automatically. The operation stops. Use the
#
touch
button to start the operation.
O
Timer
Timer
You can use the timer as a kitchen timer. The timer runs
alongside other settings. You can set it at any time,
even if the device is switched off. It has its own audible
signal so that you can tell whether it is the timer or a
cooking time which has elapsed.
Setting the timer
The maximum setting is 24 hours.
The higher the value, the longer the time intervals.
1.
Touch the 0 touch button.
The timer is displayed.
2.
Use the
(
or
)
touch button to set the timer duration.
3.
Use the
0
touch button to start.
Note:
The timer will also start automatically after a
few seconds.
The timer duration counts down. The display switches
back after a short time. If an operating mode is running,
a timer symbol is also shown on the display. If the
appliance is switched off, the time duration and a timer
symbol are shown on the display.
An audible signal sounds once the timer duration has
come to an end. Use the
0
touch button to cancel the
audible signal early.
Notes
■
The timer remains visible in the display if the
appliance is switched off.
■
If an operating mode is running, touch the
0
touch
button to display the timer. The timer duration is
displayed for a few seconds and can be altered.
Changing the timer
Touch the
0
touch button to change the timer duration.
The timer duration is displayed – touch the
(
or
)
touch
button to change it.
Cancelling the timer
If you want to cancel the timer, reset the duration on the
timer to zero. Once the change has been applied, the
symbol is no longer lit up.
:
PLQ_V
0LFURZDYH
8
7LPHU
PLQ_V