NEFF B59CR3A 0 Series, Руководство пользователя и инструкции по установке

Страница: 11 / 44

Basic operation
en
11
4.
Set the required type of heating and temperature for
the heat-up process and press to start.
→ "Setting the type of heating and temperature",
Page 11
Heating up
Type of heating Circo Therm hot air
Temperature Maximum
Cooking time 1 hour
5.
Ventilate the kitchen while the appliance is heating.
6. Press to switch off the appliance after 1 hour.
→ "Switching off the appliance", Page 11
7. Allow the appliance to cool down.
8. Clean the smooth surfaces with soapy water and a
dish cloth.
9. Thoroughly clean any accessories you used with
soapy water and a dish cloth.
8 Basic operation
8.1 Switching on the appliance
ATTENTION!
If there is water on the cooking compartment floor
when operating the appliance at temperatures above
120 °C, this will damage the enamel.
▶
Do not use the appliance if there is water on the
cooking compartment floor.
▶
Wipe away any water on the cooking compartment
floor before operation.
▶
Press to switch the appliance on.
Notes
¡
In the basic settings, you can specify whether the
display shows the main menu or another function
when the appliance is switched on.
→ "Basic settings", Page 15
¡
If you do not perform any actions on the appliance
for an extended period, it will automatically switch it-
self off.
8.2 Switching off the appliance
▶
Press to switch the appliance off.
Notes
¡
The residual heat indicator will appear on the dis-
play while the cooking compartment is still hot.
→ "Residual heat indicator", Page 11
¡
The cooling fan will continue to run until the cooking
compartment has cooled down.
→ "Cooling fan", Page 6
8.3 Residual heat indicator
After you have switched off the appliance, the residual
heat indicator will appear on the display.
Display Temperature
Residual heat high Over 120 °C
Residual heat low Between 60 and 120 °C
8.4 Setting the type of heating and
temperature
1. Press to switch the appliance on.
2. Press "Types of heating".
3. Scroll through the types of heating using or ⁠.
4. Press the type of heating that you want to use.
5. Press "Temperature".
6. Use or to select the temperature.
7. Press to confirm the setting.
Also available to select:
– Rapid heating → Page 15
– Cooking time →
Page 12
– Ready at → Page 12
– Information → Page 11
8.
Press to start the operation.
Note: When you are preheating the appliance, the
optimal time to place your food in the cooking com-
partment is as soon as the heat-up indicator is filled.
a
The cooking time appears on the display.
a
The heat-up indicator bar visualises the rising tem-
perature.
9. When the food is ready, use to switch the appli-
ance off.
8.5 Changing the temperature
You can also change the temperature or level once you
have started the appliance.
1. Press "Temperature".
2.
Use ⁠ or ⁠ to change the temperature.
3. Press to confirm the setting.
a
The temperature is changed.
8.6 Changing the type of heating
If you switch to a different type of heating, the appli-
ance will reset all the settings.
1. Press to pause operation.
2. Press to switch to the types of heating.
3. Scroll through the types of heating using or ⁠.
4. Press the type of heating that you want to use.
5. Adjust the temperature or level, if required.
6. Press to start the operation.
8.7 Pausing operation
1. Press ⁠.
2. Press again to resume operation.
8.8 Displaying information
Note:
In most cases, you can call up information about
the function that you have just started.
1.
Press "Information".
a
The information will be displayed for a few seconds.
2.
Press to close the information.