NEFF B48VT64 0 Series, Инструкция по эксплуатации

Страница: 33 / 64

Appliance door
en
33
5.
Slide the tip of the screwdriver in between the metal
tab
‚
and the plastic underneath it (fig.
#
).
6.
Use the tip of the screwdriver to carefully lift the
reflector
ƒ
until it is detached (fig.
$
).
7.
Lift the reflector
ƒ
up and out (fig.
%
).
8.
Remove the second reflector in the same way as the
first.
9.
Push down on the intermediate panel around
„
, and
carefully lift the holder
…
until you are able to pull it
out (fig.
&
).
10.
Lift the intermediate panel from below (fig.
'
) and
remove it in the direction of the arrow.
11.
Clean the glass door panels and reflectors on both
sides with glass cleaner and a soft cloth.
:
Warning
Risk of injury!
Scratched glass in the appliance door may develop
into a crack. Do not use glass scrapers, sharp or
abrasive cleaning aids or aggressive or abrasive
cleaning products.
Caution!
Make sure you do not damage the lighting. Do not
clean or touch the LED
‚
in the appliance door.
12.
Dry the door panels and refit them.
Fitting
Note:
When fitting the glass door panels, ensure that
they are in the original order.
1.
Insert the intermediate glass panel and push it in the
direction of the arrow until it is fitted in the frame. The
arrow on the intermediate glass panel must line up
with the arrow on the frame (Fig.
!
).
2.
Push the intermediate glass panel downwards in
area
‚
, insert holder
ƒ
at an angle and push down
until it locks into place (Fig.
"
).
The holder is inserted (Fig.
#
).
E
D
F
G
E
D
1
E
D
2