Cleaning functions
en
21
Cleaning recommendation
The appliance records the type and duration of the op-
eration and, if required, recommends which cleaning
function to use.
When you switch on the appliance, a notification ap-
pears in the display stating that you should use the
cleaning function. Start the cleaning function as soon
as possible.
You can use your appliance as normal. However, the
cleaning setting appears in the display until you have
run the cleaning function in full.
Note:
If the appliance is prematurely contaminated, e.g.
by greasy poultry or roasts, or if dark spots appear on
the self-cleaning surfaces, do not wait until the notifica-
tion appears in the display before you use the cleaning
functions. The more often you use the cleaning func-
tion, the longer the cleaning ability of the self-cleaning
surfaces is retained.
Preparing the appliance for the cleaning
function
In order to achieve a good cleaning result, prepare the
appliance carefully.
ATTENTION!
Using oven cleaner on the self-cleaning surfaces dam-
ages the surfaces.
▶
Do not use oven cleaner on the self-cleaning sur-
faces. If oven cleaner does get onto these surfaces,
dab it off immediately using water and a sponge
cloth. Do not rub the surface and do not use abras-
ive cleaning aids.
1.
Remove accessories and cookware from the cook-
ing compartment.
2.
Detach the shelf supports and remove them from
the cooking compartment.
3.
Remove coarse dirt using soapy water and a soft
cloth:
– From the cooking compartment floor
– From the inside of the appliance door
– From the glass cover on the oven light
This prevents stains that cannot be removed.
4.
Remove any objects from the cooking compartment.
The cooking compartment must be empty.
Configuring the EcoClean cleaning function
WARNING ‒ Risk of burns!
The outside of the appliance gets very hot when the
cleaning function is in progress.
▶
Never touch the appliance door.
▶
Allow the appliance to cool down.
▶
Keep children at a safe distance.
Requirements
¡
Prepare the appliance for the cleaning function.
¡
Do not open the appliance door while the appliance
is in operation, as this will abort the cleaning func-
tion.
1.
Press to switch the appliance on.
2.
Press .
3.
Use the or button to set "EcoClean" .
4.
Use the button to navigate to the next row.
a
The duration of the cleaning function will appear on
the display.
5.
Use the button to navigate to the next row.
6. Note:
Keep the kitchen ventilated while the cleaning
function is running.
Press to start the cleaning function.
a
The cleaning function will start. The duration will
count down on the display.
a
Once the cleaning function has run through to the
end, an audible signal will sound.
7.
Press any button to end the audible signal.
8.
After using the cleaning function, wipe down the
cooking compartment.
"Wiping the appliance clean following the clean-
Wiping the appliance clean following the
cleaning function
1.
Allow the appliance to cool down.
2.
Wipe the cooking compartment with a damp cloth.
Note:
Marks may appear on the self-cleaning sur-
faces. Residues of sugar and egg white in the food
are not removed and stick to the surfaces. Red
stains are residues from salty food – they are not
rust. The stains are not hazardous to health. These
marks do not impair the cleaning ability of the self-
cleaning surfaces.
3.
Attach the shelf supports.
16.2 Floor cleaning aid
You can use the "floor cleaning aid" to clean the cook-
ing compartment floor. The "floor cleaning aid" soaks
dirt by evaporating soapy water. It is then easier to re-
move the dirt.
Setting the floor cleaning aid
WARNING ‒ Risk of scalding!
If there is water in the cooking compartment when it is
hot, this may create hot steam.
▶
Never pour water into the cooking compartment
when the cooking compartment is hot.
Requirements
¡
You can only start the cleaning aid once the cooking
compartment is cold (room temperature) and the ap-
pliance door is closed.
¡
Do not open the appliance door while the appliance
is in operation, as this will abort the cleaning aid.
¡
To remove particularly stubborn dirt, leave the soapy
water to work for a while before starting the cleaning
aid.
¡
To remove particularly stubborn dirt, rub washing-up
liquid onto dirty areas on the smooth surfaces before
starting the cleaning aid.
1.
Remove any accessories from the cooking compart-
ment.
2. ATTENTION!
Distilled water in the cooking compartment leads to
corrosion.
▶
Do not use distilled water.
Mix 0.4 litres water with a drop of washing-up liquid
and pour into the centre of the cooking compart-
ment floor.
3.
Press to switch the appliance on.
4.
Press .
