NEFF b46w74.0GB, Инструкция по эксплуатации

Страница: 12 / 32

12
1.
Touch the
7
button.
2.
Scroll the NeffNavigator® until “Clock mode” is selected, and
push down.
3.
Scroll the NeffNavigator® in order to select either “24h” or
“12h (AM/PM)”.
4.
To apply the setting, push down, and touch the 7 button.
Timer
You can use the minute minder as an egg timer or a kitchen
timer. The appliance does not switch on and off automatically.
1.
Touch the
7
button.
2.
Scroll the NeffNavigator® until “Timer” is selected, and push
down.
3.
Scroll the NeffNavigator® in order to set the desired period
(e.g. 5:00 minutes).
Wait 3 seconds or push the NeffNavigator® down to apply
your setting.
Once the set period has elapsed, a signal sounds and the
V
symbol flashes.
4.
Touch the 7 button.
Cooking time
The appliance switches off automatically after a set cooking
time (e.g. 1:30 hours).
1.
Set the operating mode and temperature.
2.
Press NeffNavigator® down.
3.
Scroll the NeffNavigator® until “Cooking time” is selected,
and push down.
4.
Scroll the NeffNavigator® in order to set the desired cooking
time (e.g. 1:30 hours).
5.
Touch the m button.
Once the cooking time has elapsed, a signal sounds, the
x symbol flashes and the set operating mode is stopped.
6.
Touch the
7
button.
7.
Press and hold the
~
button for 2 seconds.
End of operation
The appliance switches off automatically at a set time
(e.g. 12:30).
1.
Set the operating mode and temperature.
2.
Press NeffNavigator® down.
3.
Scroll the NeffNavigator® in order to select “End of
operation”, and push down.
4.
Scroll the NeffNavigator® in order to set the desired end of
operation (e.g. 12:30).
5.
Touch the
m
button.
Once the end of operation is reached, a signal sounds, the
y
symbol flashes and the set operating mode is stopped.
6.
Touch the 7 button.
7.
Press and hold the ~ button for 2 seconds.
Preset operation
The appliance switches on automatically, then switches off
automatically at the time preselected for the end of operation.
To set this function, combine the cooking time and end of
operation clock functions.
Bear in mind that food which spoils easily should not be left in
the cooking compartment for too long.
1.
Set the operating mode and temperature, and push down the
NeffNavigator®.
2.
Scroll the NeffNavigator® in order to select “Cooking time”,
and push down.
3.
Scroll the NeffNavigator® in order to set the desired cooking
time (e.g. 1:30 hours).
Wait 3 seconds or push the NeffNavigator® down to apply
your setting.
4.
Scroll the NeffNavigator® in order to select “End of
operation”.
5.
Push down and scroll the NeffNavigator® in order to set the
desired end of operation (e.g. 12:30).
6.
Touch the
m
button.
The set operating mode does not start immediately. The
cooking compartment light goes out. The appliance waits
until the appropriate time to start (for example at 11:00).
Once the end of operation is reached (for example at 12:30),
a signal sounds, the
y
and
x
symbols flash and the set
operating mode is stopped.
7.
Touch the
7
button.
8.
Press and hold the
~
button for 2 seconds.
Correcting or cancelling settings
1.
Touch the
7
button.
2.
Scroll the NeffNavigator® in order to select the clock
function, and push down.
3.
Scroll the NeffNavigator® in order to correct the setting
or
Scroll the NeffNavigator® and turn the setting back to
“00:00” in order to cancel the setting.
Your setting is applied after 3 seconds.
K
ƒ&
&LUFR7KHUP
ƒ&
&LUFR7KHUP
K
&LUFR7KHUP
ƒ&