NEFF B45C42.0, Инструкция по эксплуатации

Страница: 8 / 36

8
Changing the clock
To subsequently change the time, press the KJ clock function
button repeatedly until the KJ and 3 symbols light up again.
Change the time with the rotary selector.
Cleaning the appliance
Clean your appliance before using it for the first time.
1.
Remove the accessories from the cooking compartment.
2.
Completely remove any residual packaging (e.g. chips of
polystyrene) from the cooking compartment.
3.
Clean the accessories and cooking compartment with hot
soapy water (see section: Cleaning and care).
4.
Fill the water tank with 400 ml water (see section: Filling and
emptying the water tank).
5.
Slide in the water tank all the way.
6.
Switch on the appliance. To do this, press the operating
mode selector so that it pops out.
The appliance is then ready for use.
7.
Using the operating mode selector, set % Top/bottom heat
(see section: Operating the appliance).
8.
Use the temperature selector to set the temperature to
240 °C.
9.
Press the Ÿ VarioSteam button repeatedly until the • ž Ÿ
symbols light up (see section: VarioSteam - steam-assisted
cooking).
10.
Press the ƒ Start button.
11.
Switch off the appliance if the water tank is empty. To do
this, turn the operating mode selector to the Û off position
and push it in.
The remaining water will be pumped out of the evaporator
system. The
Ì
symbol lights up.
12.
Emptying the water tank (see section: Filling and emptying
the water tank)
13.
Afterwards, wipe the cooled cooking compartment with hot,
soapy water.
Note:
Remove limescale marks with a cloth soaked in
vinegar, then wipe over with clean water and rub dry with a
soft cloth.
14.
Clean the outside of the appliance with a soft, damp cloth
and soapy water.
Operating the appliance
In this section, you can read about
■
how to switch your appliance on and off
■
how to select an operating mode and temperature
■
how to fill and empty the water tank
■
when your appliance switches off automatically
Switching on the appliance
Press the operating mode selector to make it pop out.
This switches on the appliance, and it is now ready for use.
The ~ symbol lights up.
Selects the operating mode and temperature
ã=
Risk of scalding!
by hot water. The water in the water tank may become hot.
Empty the water tank before starting operating modes that do
not use steam.
Notes
■
The operating modes
/
Low-temperature cooking and
>
EasyClean® can only be started if the cooking compartment
has cooled down. There must be no residual heat ( • or œ )
showing in the temperature display.
■
For steam-assisted applications, you must fill the water tank
(see section: Filling and emptying the water tank).
1.
Switch on the appliance.
2.
Turn the operating mode selector until the desired operating
mode is selected.
3.
Turn the temperature selector to change the default
temperature.
Note:
If no default temperature is displayed, the temperature
of your selected operating mode is set permanently. You
cannot change this temperature.
4.
Press the
ƒ
Start button.
Notes
■
Depending on the operating mode that you have selected,
you will hear a pumping noise after the operation has started.
The appliance is checking whether the pumps are working
correctly.
■
If you cannot start a steam-assisted application, check
whether the water tank has been filled and fully inserted.
Operating mode Default temper-
ature in °C
Temperature
range in °C
3
CircoTherm®*
160 40 - 220
%
Top/bottom heat* 170 50 - 275
* You can activate steam for this operating mode
** Turn the temperature selector beyond 275 °C.
‚Ÿ£
appears
in the temperature display