Neets UniForm, Руководство по установке

Страница: 8 / 16

To mount the controller onto an electrical
box, follow Step 1, which is illustrated on
page 8 (DK) or 9 (EU).
If you are not mounting onto an electrical
box, skip ahead to Step 2 to 5, which are
shown on page 10 .
Before you start, make sure the wall itself
is even to prevent any distortion of the
bracket.
3
Mounting the bracket
5
4
3
2
1
7
Mount the bracket onto the electrical box
using the dedicated screws for the type of
electrical box that you have (see page 6).
Remove the bracket again.
Mount the bracket and tighten the screws
into the wall. Level the bracket on the wall and mark
the center of the bracket holes (W) on
the wall.
Drill and insert wall plugs.