Nedo SIRIUS 1 HV, Руководство по эксплуатации

Страница: 14 / 76

Operating Instructions SIRIUS 1 HV Rotating Laser 14
Self-levelling EN
The SIRIUS 1 HV has a self-levelling feature.
This self-levelling feature is switched on by
pressing the ON/OFF button. The horizontal beam
(H) starts to rotate and the plumb beams (L
1
and
L
2
) are switched on.
If the unit is placed in a slanted position of up to 5°
in any direction, the laser beams are plumb and
horizontal.
If the 5° range is exceeded, the horizontal beam
stops rotating and starts to flash together with the
two plumb beams (L
1
and L
2
).
Specifications
Model SIRIUS 1 HV
Ref. No. 471940 / 471940-632
Laser configuration 1 laser dot, rotating from 0° to 360°
– 1 laser line due to rotating laser dot
– 1 scan array (limited line), see scan angle
1 plumb point upward and downward
Rotational speed 0, 60, 120, 300, 600 rpm
Scan angle 0°, 6°, 20°, 50°, 90°
Levelling accuracy ± 0.1 mm/m
Levelling time < 30 sec.
Thread BSW 5/8" on unit
Working range 300 m (diameter) with receiver
Wavelength 635 nm
Laser class 2 / 3R
Output < 1 mW / < 5 mW
Self-levelling range ±5° to the horizontal and vertical axis, motorised
Set of NiMH 4.8 V rechargeable batteries, including charger
Power supply
Battery capacity approx. 3800 mAh
Battery life approx 30 h
Charging time approx 5 h
Operating temperature –20 °C to +50 °C
Class of protection IP 65
Dimensions B 150 mm / D 200 mm / H 190mm
Weight 2.3 kg
Model Infrared remote control
Range Approx. 25 m
Power supply Batteries: 2 x 1.5 V (AAA)
Dimensions B 46 mm / D 24 mm / H 111 mm
Weight 0.07 kg
We reserve the right to make technical changes without notice.