Nedo Quasar 6, Руководство по эксплуатации

Страница: 17 / 68

Quasar 6 Operating Instructions 17
4 Structure EN
4.2
Quasar 6
control panel
5 Initial Startup
Quasar 6
When starting the Quasar 6 up for the first time, charge the integrated set of rechargeable
batteries (4.8V / 2x2.4V) to become maximum operating time. Use the charger supplied
(see chapter 6.2).
Important! Only use the charger supplied.
6 Power Supply
6.1 Insert rechargeable batteries
The Quasar 6 green requires 2 NiMH rechargeable battery
packs.
• Push together the tabs to the right and left on the battery com-
partment cover.
• Pull off battery compartment.
• Insert rechargeable battery packs as specified.
Ensure pole direction is correct!
(See figure)
• Position battery compartment and push into the unit.
• Ensure that both tabs latch into place.
1
"Pulse function"
button
Switches the Pulse function
on / off
2
LED display
"Pulse function"
Lights up green if "Puls
function" mode activated.
3
"Vertical" button
Consecutively switches the
four vertical beams on and
switches them all off
together (see chapter 3.1).
Press 1 x: V
1
+V
2
Press 2 x: V
1
+V
2
+V
3
Press 3 x: V
1
+V
2
+V
3
+V
4
Press 4 x: all off
4
4
"Horizontal" button
Switches the horizontal
beam on / off.
5
LED display
"Rechargeable battery"
Lights up red if power supply
is weak.
Lights up red if inadequate.
Power supply .
1
2
3
4
5
-
-