Operating Instructions
ECO 600 HV Rotating Laser
13
Structure EN
Control panel of the IR remote control
Initial Startup
ECO 600 HV
When starting the
ECO 600 HV
rotating laser up for the first time, charge the integrated set of
rechargeable batteries (4.8 V) using the charger supplied. The charger socket is located below
the handle, behind a rubber cap. The set of batteries is fully charged when the green LED on
the charger lights up.
Important!
Only use the charger supplied.
IR remote control
Insert the 2 batteries supplied (type AAA) in the IR remote control.
Ensure pole direction is correct!
Receiver
Insert the battery supplied (type 9V) in the receiver.
Ensure pole direction is correct!
Starting up the unit
When using on site, set up the
ECO 600 HV
according to the application.
The button symbols and functions correspond to
the comparable buttons on the control panel of the
ECO 600 HV, see page 12.
Exception:
13
"Send" LED display
Briefly lights up when buttons 4, 5 or 12 are
pressed.
Flashes as long as buttons 1, 2, 3 or 6 are
pressed.
13
