nedis WIFIWP10GY, Быстрый старт

Страница: 6 / 60

6
3. Set the desired irrigation frequency at How often
B 4 .
Select a delay between 1 hour and 7 days.
4. Set the desired irrigation duration at
B 5 .
Select a duration between 6 seconds and 30
minutes.
5. Tap
Auto Run B 6 to start the automatic
irrigation schedule.
After confirming the automatic irrigation settings,
the
Working Status B 3 changes to Auto .
The product starts the countdown to the first
irrigation at
Next Irrigation B 1 .
The product starts irrigating for the selected
duration. The
Remaining Watering Time B 2
shows a countdown until the current irrigation ends.
When the first irrigation has finished, the product
will irrigate again after the selected delay.
Status indicator LED
Irrigation
indicator LED
A
1
Blinks every 0.5
second.
Lack of water.
Lights up. Irrigating.
Wi-Fi indicator
LED A 3
Blinks every 0.5
second.
Ready for
pairing.
Blinks every 1.5
seconds.
Searching for a
Wi-Fi network.
Blinks every 3
seconds.
Batteries
almost empty.
Blinks 0.5
second on and
3 seconds off.
Batteries
connected.
Lights up. Paired with a
smartphone.
Declaration of Conformity
We, Nedis B.V. declare as manufacturer that the
product WIFIWP10GY from our brand Nedis®,
produced in China, has been tested according to all
relevant CE standards and regulations and that all
tests have been passed successfully. This includes,
but is not limited to the RED 2014/53/EU regulation.
The complete Declaration of Conformity (and the
safety datasheet if applicable) can be found and
downloaded via:
nedis.com/wifiwp10gy#support
Option B:
Click the mounting clip
A 7 on the back of the
product.
Use
A 7 to mount the product to or near a water
reservoir.
2. Fill the water reservoir with water.
3. Press the irrigation tube
A u into the water inlet
A t .
4. Cut a piece off A u . Make sure A u reaches the
bottom of the water reservoir.
5. Connect
A u to the water filter A r .
6. Place A u in the water reservoir.
7. Create an irrigation network using A u and the
provided connectors A 9qw . See an installation
example in image C .
8. Insert the arrow drippers A 8 into the ends of
A u for every irrigation point.
9. off any remaining tube ends of A u with end
plugs A e .
10. Connect the irrigation network to the water
outlet
A y .
Using the product
- Disconnect the product when freezing
temperatures are expected, to avoid potential
freeze damage.
4
Use the app to set and operate the product.
For more information about the working and
possibilities of the app, consult the extended manual
online.
Manual irrigation
1. Press the manual irrigation button A 2 to irrigate
the time set in the app.
The irrigation indicator LED A 1 lights up to indicate
the product is irrigating.
2. Press
A 2 to manually stop the cycle.
Automatic irrigation
4
Automatic irrigation is only available in the app.
4
Plugging A i is required to set or change the
automatic irrigation settings.
1. Plug A i into A 5 .
2. Plug the other end of A i into a suitable 5.0 VDC
; 1.0 A USB power supply.
- Do not use a USB power supply with a higher
voltage.