nedis MPWL200BK, Быстрый старт

Страница: 7 / 84

7
• Do not remove a cell or battery from its original packaging
until required for use.
• Do not use any cell or battery which is not designed for use
with the equipment.
• Use only the cell or battery in the application for which it
was intended.
• Do not mix cells of different manufacture, capacity, size or
type within a product.
• Wipe the cell or battery terminals with a clean dry cloth if
they become dirty.
• Battery usage by children should be supervised.
• Observe the plus (+) and minus (–) marks on the cell, battery
and equipment and ensure correct use.
• When possible, remove the battery from the product when
not in use.
• Properly dispose of the empty battery.
• Seek medical advice immediately if a cell or a battery has
been swallowed.
• Some wireless products may interfere with implantable
medical devices and other medical equipment, such as
pacemakers, cochlear implants and hearing aids. Consult
the manufacturer of your medical equipment for more
information.
Inserting the batteries (image B + C )
Receiver
- Use only size AA batteries for this product.
1. Open the battery compartment A
e
.
2. Place 2 size AA batteries (not included) into A
e
.
- Make sure to match the (+) and (-) polarity markings.
3. Close A
e
.
Microphone
- Use only size AA batteries for this product.
1. Rotate and pull A
6
from the microphone.
2. Place 2 size AA batteries (not included) into A
6
.
- Make sure to match the (+) and (-) polarity markings.
3. Place and rotate A
6
back onto the microphone.
4. Place the foam cover
A
7
over the microphone A
1
.
Switch on the microphone
1. Press and hold the on / off button A
3
for 2 seconds to
switch on the product.
• Press and hold A
3
for 3 seconds to switch off the product.