FilterCart
New
N.B.
UP-arrow
Changing the HEPA filter
(accessory)
If the FilterCart has been supplied
with a HEPA filter, this should be
changed at the same time as the
main filter cartridge is changed.
Use necessary personal safety
equipment when changing the
HEPA filter.
Change the HEPA filter cartridge in
the following way:
1.
Disconnect the mains connection cable.
2.
Unscrew the top cover.
3.
Remove the used HEPA filter and put it
in the plastic bag which comes with the
new HEPA filter. Close the plastic bag with
the band supplied.
4.
Handle the used HEPA filter according
to the relevant regulations for the
substances that have been collected.
5.
Check that the new HEPA filter not is
damaged.
It should be noted that the
filter surface must not be touched.
Handle the HEPA filter very carefully and
fit it in the FilterCart. Ensure it is fitted in
the correct position and that the seal is
downwards. Check that the seal not is
damaged. Note the UP-arrows.
6.
Refit the top cover. Fasten it securaly.
Maintenance
Is recommended at least once a year.
WARNING!
Risk for personal injuries!
• Disconnect the mains connection cable
before starting any maintenance work.
• Use necessary personal safety equipment.
• Change the filter cartridge (and optional
HEPA-filter) if necessary.
• Check the airflow capacity of the FilterCart.
• Check that the Fume Extractor hose is not
damaged. If necessary change the hose.
• Check that the hose to the fan inlet is not
damaged. If necessary change the hose.
• Check that no objects have been caught on
the guard net on the fan inlet.
• Check that the pressure drop hose (from
the control board) not is damaged and is
fitted properly.
• If necessary, adjust the Fume Extractor links.
• If necessary, tighten the arm profile bolts*.
• Check that the mains connection cable and
the fan motor cable are not worn or damaged.
• Check that the eccentric locks tighten the
filter casing properly. Adjust the eccentric
locks if necessary.
*
*
*
*
*
Motor
Protector
Reset
7
