Nederman Single Exhaust Extractor, Инструкция по эксплуатации

Страница: 12 / 52

Single Exhaust Extractor EN
12
6 Maintenance instruction
To ensure that the system continues to operate correctly, the following is to be
checked once a year or more often depending on the amount of use. Defective
and worn parts is to be replaced immediately.
1. The nozzle’s internal contact surface. Clean when necessary.
2. The suspension of the balancer with safety chain.
3. The operation of the balancer, make sure that the hose lifts up properly. If
necessary, adjust the lifting power of the balancer according to instruction
no. 148103.
4. The grip function in the nozzle.
5. The hoses.
6. Check the air flow (cars 400 m
3
/h, trucks and buses 1500 m
3
/h) in the
nozzle opening with an air flow indicator. If required, check the fan
impeller rotation direction and/or damper function.
WARNING! Risk of personal injury.
A dust filter mask is to be used during service and repairs of the system,
specially when working on the nozzle, hose and duct.
6.1 Spare parts
Contact your nearest authorized distributor or Nederman for advice
on technical service or if you require help with spare parts. See also
www.nederman.com.
Ordering spare parts
When ordering spare parts always state the following:
• Part number and control number (see the product identification plate).
• Detail number and name of the spare part (see www.nederman.com).
• Quantity of the parts required.
7 Recycling
The product has been designed for component materials to be recycled.
Its different material types must be handled according to relevant local
regulations. Contact the distributor or Nederman if uncertainties arise when
scrapping the product at the end of its service life.