Nederman FlexPAK 1000, Инструкция по установке и обслуживанию

Страница: 14 / 34

FlexPAK 800/1000 EN
14
FlexPAK 1000
Relative humidity Max. 85% Max. 85% Max. 85%
Compressed air 6–10 bar (87–102 PSI) 6–10 bar (87–102 PSI) 6–10 bar (87–102 PSI)
Material recycling 93.6% per weight 93.6% per weight 93.6% per weight
* According to DIN EN/IEC 60335-2-69.
3.4 Fuses
Table 3-3: Fuses
Fuse Size Type
Main fuse F1, 230 V 65 A Slow mains fuses
Main fuse F1, 400 V 35 A Slow mains fuses
Main fuse F1, 460 V 40 A Slow mains fuses
Transformer, primary fuse F2 and F3 0,8 A* Slow fuses, 10.3×38
Transformer, secondary protection PTC resistor
F4 50 mA* Fast, 5×20
F5 1 A* Slow, 5×20
* General size, see also the included electrical diagrams.
3.5 Main components
WARNING! Explosion risk.
Never use the unit without a plastic bag.
CAUTION! Risk of equipment damage.
Use only Nederman original spare parts and accessories.
Figure 3, 4 and 5 show the main components of the unit:
1.
Collector bin, see figure 3.
2.
Dust extractor, see figure 3.
3.
Textile filter bags, see figure 3.
4.
Filter holder, see figure 3.
5.
Filter Cleaning Valve (FCV), see figure 3.
6.
Connection duct from the dust extractor to the inlet silencer, see figure 3.
7.
Start and control unit, see figure 3 and 4.
8.
Control panel, see figure 3 and 4.
9.
Emergency switch, see figure 3 and 4.
10.
Frequency converter, see figure 3 and 4.
11.
Frequency converter cooling air filter, see figure 3 and 4.
12.
Cooling valve, see figure 3 and 4.
13.
High pressure side channel fan, with pump characteristic, see figure 3 and 4.
14.
PT100 sensor, see figure 4.
15.
Outlet silencer after fan, see figure 4 and 5.
16.
Cooling air hose from the frequency converter cabinet, see figure 5.