Nederman 10560232, Руководство пользователя

Страница: 21 / 87

NEX HD
6.1 Adjusting the links
See Figure 15 . Recommended at least once a year. Use
the necessary safety equipment.
• A. Adjust the inner link.
• B. Adjust the knee link.
• C1. Loosen the bellows.
• C2. Unscrew the ball joint from the hood.
• C3. Remove the bellows.
• C4. Loosen the two socket head cap screws.
• C5. Tighten the ball joint using two adjustable span-
ners.
• C6. Remount the ball joint at the hood and test the
hood movement. If necessary, tighten the ball joint
still more.
• C7. Tighten the two socket head cap screws.
• C8. Unscrew the ball joint from the hood. Refit the
bellows. Fasten the bellows at the outer arm cover.
Fasten the ball joint at the hood.
NOTE!
The nut securing the hood must be tightened
securely.
7 Spare Parts
CAUTION! Risk of equipment damage
Use only N
$
e
$
d
$
e
$
r
$
m
$
a
$
n
$
original spare parts and ac-
cessories.
Contact your nearest authorized distributor or
N
$
e
$
d
$
e
$
r
$
m
$
a
$
n
$
for advice on technical service or
if you require help with spare parts. See also
w
$
w
$
w
$
.
$
n
$
e
$
d
$
e
$
r
$
m
$
a
$
n
$
.
$
c
$
o
$
m
$
.
7.1 Ordering spare parts
When ordering spare parts always state the following:
• The part number and control number (see the
product identification plate).
• Detail number and name of the spare part (see
w
$
w
$
w
$
.
$
n
$
e
$
d
$
e
$
r
$
m
$
a
$
n
$
.
$
c
$
o
$
m
$
/
$
e
$
n
$
/
$
s
$
e
$
r
$
v
$
i
$
c
$
e
$
/
$
s
$
p
$
a
$
r
$
e
$
-
$
p
$
a
$
r
$
t
$
-
$
s
$
e
$
a
$
r
$
c
$
h
$
).
• Quantity of the parts required.
8 Recycling
The product has been designed for component mater-
ials to be recycled. Different material types must be
handled according to relevant local regulations. Con-
tact the distributor or
$
N
$
e
$
d
$
e
$
r
$
m
$
a
$
n
$
if uncertainties arise
when scrapping the product at the end of its service
life.
EN
21