Nedap VP1101, Руководство по обслуживанию

Страница: 5 / 8

VP1101-200PM-00 ISO Reader Solid (CAN) Manual version 1.0 / Page 1
Preface
This manual is part of the service documentation for Nedap Velos. Reference is also made to other
manuals that are part of the Nedap Velos documentation. For an overview of available Nedap Velos
manuals see the manual “Nedap Velos General Description”, or visit the Nedap Agri website
www.nedap-agri.com.
1 Introduction
The Velos VP1001 is a Velos component that is used to identify RFID tags on animals. The VP1101 is
installed close to the spot where identification is required, for example on the animal feeder.
2 Description and functioning
A VP1101 is connected to the CAN-bus and can identify tags on ISO frequency 134.2 kHz.
There are two types, FDX/HDX or FDX only.
3 Safety
Installation and service only by trained personnel.
Always turn off the main power when working on the electrical installation.
Compliance statement (part 15.19)
This device complies with part 15 of the FCC Rules and to RSS210 of Industry Canada.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
Warning (part 15.21)
Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.