uPASS Target | quick reference guide
2/5
Installation
Safety instructions
The following safety precautions shall be observed during normal use, service and repair.
•
The uPASS Target shall only be installed and serviced by qualified service personnel.
•
Disconnect the power supply before (dis)connecting any wires, uPASS Target is NOT hot-swappable, so when
making or changing connections, power must be switched OFF.
•
To be sure of safety, do not modify or add anything to the uPASS Target other than mentioned in this installation
guide or indicated by Nedap N.V.
Mounting instructions
The uPASS Target can be mounted to any surface with the wall mounting bracket and Pole Mounting Set. The uPASS
Target can be “aimed” at the desired detection area with the mounting brackets.
Reader dimensions
Figure 1: uPASS Target dimensions
Wall mounting bracket
Figure 2: Wall Mounting Bracket
