MACE SMART | INSTALLATION GUIDE
Connections
9/34
3.3
LED CONTROL
The built-in high intensity LED provides visual feedback that the tag has been read
or authorized. The LED and buzzer can be controlled by the access control system.
Automatic mode:
Default the MACE reader will automatically control the LED.
During stand-by the LED will be BLUE and upon identification it will be GREEN.
These colors can be changed!
Remote control:
The LED and buzzer can be controlled remotely by a connected access control
system by activating digital inputs (active low). See chapter 3 for connection details.
Use MaceConfigTool software to setup the LED/buzzer control mode and configure
the corresponding LED colors.
Color UL
LED color when input Led_UL_IN active
Color NA
LED color when input Led_NA_IN active
Color UL+NA
LED color when both inputs Led_UL_IN and Led_NA_IN active
Color idle
LED color when both inputs not active
Direct (serial cmd):
The LED and buzzer can only be controlled by serial commands.
OSDP firmware:
Use the OSDP_LED command to control the LED.
Automatic mode and Remote control are not supported.
