COMBI-BOOSTER
© Nedap IDEAS, P.O. Box 103, NL-7140 AC GROENLO
Page 9 of 11
7 LOW FREQUENCY 120KHZ RF INTERFACE
The combi-booster's vehicle-id can be read and written by all NEDAP 120kHz readers and writers
7.1 READING THE VEHICLE-ID NUMBER
The combi-booster automatically detects if an external 120kHz field is applied. When this is the case the
combi-booster will act as a normal low frequency transponder. Any Nedap low frequency RFID reader is
able to read the vehicle-id of the combi-booster. Refer to the manual of the RFID reader for more details.
7.2 WRITING THE VEHICLE-ID NUMBER
The combi-booster's vehicle-id number is normally programmed during production, but can also be
programmed by the customer. Programming the combi-booster's vehicle-id number is done by an low
frequency writer (e.g. XS110W).
NEDAP LabelProgrammer is a 32 bit Windows application for programming NEDAP RF-ID tags.
NEDAP LabelProgrammer can be started stand-alone for manually programming the NEDAP tags but
can also be remotely controlled by OLE Automation.
The vehicle-id number can not be programmed in 128-bit formats like EF-code (also called 80-bit tags).
