NED XCM6040SA, Руководство пользователя

Страница: 37 / 82

NED
UME-0034-03 XCM8060SA_8040SA_6040SA
37
(Ratio=2, Exposure Counter=90
）
90/(2
＋
1)
＝
30
→ Send “mst 0,0,30”
（
Ratio=5, Exposure Counter=90
）
90/(5
＋
1)
＝
15
→ Send “mst 0,0,15”
（
Ratio=10, Exposure Counter=90
）
90/(10
＋
1)
＝
8.18
→ Send “mst 0,0,9”
⑦
Change the camera exposure mode to “Multi Slope” or “Ext Multi” (send “inm 3” or
“inm 4”)
⑧
By adjusting “msl”, you can lower the data level of the bright area to the desired
level without affecting the dark area.
For reference, the “msl” values and the points at which the slope changes are plotted
below.
e.g. To have the slope change at 150 in 8-
bit data, send the command “msl
0,0,10”.
To have the slope change at the same 150 level when analog gain is set to x2,
150/2=75; therefore in the above graph, the msl setting value should be closest
to 75, ie 13. That is, send the command “msl 0,0,13”.
3 slopes & 4 slopes are set in the same way.
gax＝1の時の折曲がり点
0
50
100
150
200
250
300
0 5 10 15 20
mslの設定値
出力
デ
ー
タ