Nectre Fireplaces WONDERFIRE, Инструкция по установке и эксплуатации

Страница: 6 / 28

6
OPERATING INSTRUCTIONS - Customer
Congratulations on your purchase of the Nectre Wonderfire.
This gas coal fire has been bench tested in the factory to ensure satisfactory operation.
Safety First!
• The appliance is designed to simulate a coal fire and as such working surfaces can become
quite hot. Do not touch them. Always take extra care with young children or the infirm.
• A separate fireguard can be used to protect young children or the infirm.
• DO NOT PLACE ARTICLES ON OR AGAINST THIS APPLIANCE.
• DO NOT USE OR STORE FLAMMABLE MATERIALS NEAR THIS APPLIANCE.
• DO NOT SPRAY AEROSOLS IN THE VICINITY OF YOUR FIRE WHILST IT IS IN USE.
• DO NOT OPERATE WITH PANEL COVERS, OR GUARDS REMOVED FROM THIS
APPLIANCE.
• Primarily a decorative appliance - not certified as a space heater.
• The unit must be installed and serviced by a qualified person.
• Wash hands after handling coals and ensure children do not handle them as the colouring may
contain toxic dies.
Caring for your Nectre Wonderfire
Your Nectre Wonderfire has been designed for ease of use and is very easy to maintain. The fire is
a sealed unit and there are no user serviceable components inside, other than the batteries.
To clean:
• Metal surfaces; simply wipe over with a damp cloth.
• Do not use harsh cleaning agents or solvents.
• Ceramic coals; Lightly vacuum with a soft brush attachment.
• Pilot Light; check for lint and dust, vacuum as necessary.
• For units with a fan, check the air intake at the front of the fire is free of lint and dust, vacuum
and clean as necessary.
• Do not attempt to clean the unit whilst it is operating (including Pilot Light) or whilst it is hot.
• After a number of hours of use of the Fire, there may be a slight blackening of some parts the
coals. This is normal and helps enhance the realistic coal fire look.
If your Nectre Wonderfire needs servicing
Your Nectre Wonderfire is reliably designed and built to a fully tested design. If the fire has been
only recently installed and fails to operate, you should call the installer to solve any problems.
Check with the installer that installation has been carried out correctly, that the gas lines have been
bled and gas cocks are turned on. If the problem is not related to the installation, please call your
place of purchase and let them know what model you have installed and a description of the
problem. If necessary, they will refer back to the manufacturer.
If after some use the appliance fails to operate, you can telephone us direct:
Phone: 1300 554 155