KREA ESPRESSO
2
1
2
3
4
1
a
b
Product load
• Open the machine door
• Lift the upper panel
Clean the waste trays
• As soon the message “FULL WASTE” appears, open the machine
door
• Take the tray by its sizes, lift slightly and pull
• Push on hook B to release cover A of the liquid waste tray
• Empty and wash the tray
Clean the waste trays
• Open the machine door
• Take the liquid waste tray by its sizes, lift slightly and pull
• Remove the solid waste tray, empty and wash it
• Re-position the trays by following the reverse order
• Close the machine door and reset the waste
Password and closed-door operations
• The machine is ready to carry out closed-door operations. You can
reset the solid waste count and wash the mixer.
• Closed-door operations are automatically carried out after the pas
-
sword entry.
• Press and hold down the last key at the bottom on the right (9) for 5
seconds.
• The machine displays the message “PASSWORD”.
Product load
• Load the coffee beans from the mouth (A)
• Load the instant powder by opening the canister cover (B) and
make sure that the loaded powder is not compressed
• Re-close the canisters and lower the upper panel
• Close the door and wash the mixer by means of a password
Make sure that the products to be loaded have been
properly preserved and used before their expiration
date
EMPTY THE TRAY
PASSwORd
Password entry
Use the machine keyboard to enter the password; each key has the
numeric value shown by the figure.
The waste reset or the mixer wash cycle is automatically done after the
relative password entry.
b
a
lo
ad
th
e
pr
oduc
ts
clean
th
e
tra
ys
cl
osed
-door
opera
tions
1
2
2
1
1
2
3
wASTE COnT.
full
0
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
write the mixer wash
password
write the waste reset
password
