Necci NMPC6319Q, Руководство пользователя

Страница: 8 / 32

3. Ensure that the outside of the Inner Pot is clean, then place the Inner Pot inside the Cooker
Body.
4. Unless you are using the Sauté function, you must place the Cooker Lid on the Cooker Body,
then turn it counterclockwise to lock it in place.
5. Make sure the Pressure Limit Valve (1) is attached with the needle pointing to the right.
Make sure the Float Valve (3) is in the down position. Turn the Release Valve Needle (2) to
the Keep Pressure Setting .
6. Plug the power cord into a grounded electrical outlet. The Control Panel will turn ON and will
show “----” to indicate the pressure cooker is in standby mode.
COOKING WITH THE PRESSURE COOKER
1. Turn the Pressure Limit Valve (1) to the Keep Pressure Setting .
2. Rotate the Program/Adjustment Knob (D). The Control Panel will unlock and will show all of
the available cooking modes. The selected cooking mode will blink, and the default cooking
time will appear on the screen. Continue rotating the Program/Adjustment Knob (D) until
your chosen cooking mode is selected.
3. Press the Time Adjust Button (E). The default cooking time will flash on the screen. If you
wish to adjust the cooking time, rotate the Program/Adjustment Knob (D) until your desired
time is shown on the screen.
4. Press the Start/Cancel button (D). The pressure cooker will immediately begin the
pressurizing process.
•
NOTE: the time on the screen will continue to show your selected time until the
pressure cooker is pressurized. This process will take a few minutes depending on
the type and amount of food being cooked as well as the chosen cooking mode. Once
the pressure cooker is pressurized the Float Valve (3) will rise to a higher position,
and the timer will begin counting down from your selected time.
5. When the cooking time has completed the pressure cooker will beep and then automatically