Necchi NC-102D Скачать руководство пользователя страница 29

Страница: 29 / 80

Sound button

Buzzer turn off : Press the sound button and

when you hear the machine delivering a short

beep, the sound will be turned off.
Buzzer turn on : When machine is in silent

mode, press the button and it will deliver two

short beeps to remind you that the sound is

turned on now.

Needle up/down position button

With the needle up/down position button,

you decide whether the needle stops in the

highest or in the lowest position (i.e. in the

fabric) when you stop sewing.

Note

During sewing, press the needle up/down

position button, it can not to change the

needle position.

Press the button so that the arrow on the LCD

screen points upward and the needle stops

in the highest position. Press the button so

that the arrow points downward, the machine

stops with the needle in the lowest position.

Auto-lock button

When machine is not sewing: Press the auto

lock button, machine will sew 3 stitches in the

same position then stop.
During machine is sewing: When the Regular

Pattern Group number 00-05 is selected,

the machine will sew 3 locking stitches if the

auto-lock button pressed. Then it will stop

automatically.
During machine is sewing: When the Regular

Pattern Group number 06-19 or 31-99 is

selected, the machine will sew 3 locking

stitches at the end of the current stitch if the

auto-lock button pressed. Then it will stop

automatically. The function can be cancelled

if pressed the button once again during

sewing.
The auto-lock icon will be disappeared when

the current sewing completed.

Содержание NC-102D

















































































Результаты поиска

Содержание NC-102D

Отзывы:

Necchi NC-102D, Инструкция по эксплуатации, Страница: 29 / 80

Результаты поиска

Содержание NC-102D

Отзывы: