Necchi L234A страница 48 Скачать руководство пользователя

Страница: 48 / 52

Problem

Cause

Correction

Reference

Stitches

Skipping

3. Needle may not be the correct

size for the fabric being sewn.

3. Use a needle size that is

compatible for the fabric.

4. Machine may not be threaded

correctly or threads were

threaded in the incorrect

sequence.

4. Check that machine is

threaded in correct order as

shown in machine manual.

5. Using thread that is poor

quality or has uneven filament.

5. Use good quality thread with a

smooth, even filament.

Irregular

Stitches

1. Stitches are not balanced.

1. Adjust thread tensions and

possibly cutting width.

16/19

2. Thread is not unreeling

smoothly off the thread spool.

2. Check the thread spool to

ensure thread is not getting

caught.

3. Machine may not be threaded

correctly or threads threaded

in the incorrect sequence.

3. Check that machine is

threaded in correct order as

shown on.

Fabric

Puckers

1. Thread tensions are set too

tightly.

1. Loosen thread tensions.

2. Thread is not unreeling

smoothly off the thread spool.

2. Check the thread spool to

ensure thread is not getting

caught.

3. Using thread that is poor

quality or has uneven filament.

3. Use good quality thread with a

smooth, even filament.

4. Stitch length is set too short.

4. Adjust stitch length to a longer

setting.

5. Differential Feed is not set in

the correct position for the

fabric being sewn.

5. Adjust the differential feed.

Irregular

Trimming

1. Upper and lower fabric cutters

are not in proper position.

1. Check alignment of cutters.

37/38

2. Cutter(s) are damaged or worn

out.

2. Replace one or both cutters.

37/38

Fabric Jams

1. Upper and lower fabric cutters

are not in proper position.

1. Check alignment of cutters.

37/38

2. Thread is not unreeling

smoothly off the thread spool.

2. Check the thread spool to

ensure thread is not getting

caught.

3. Too much fabric thickness.

3. Compress thick layers with

conventional sewing machine

before sewing on your overlock

machine.

Содержание L234A





















































Результаты поиска

Содержание L234A

Отзывы:

Похожие инструкции для L234A

Бренды по названию

Популярные бренды

Necchi L234A, Инструкция по эксплуатации

Результаты поиска

Содержание L234A

Отзывы:

Похожие инструкции для L234A

Бренды по названию

Популярные бренды