Necchi HD22, Инструкция

Страница: 29 / 40

27
Machine setting
Blind Stitch Hemming
Fold up the desired amount and pin
in place. Then fold the hem under
the fabric as illustrated.
Turn the power switch off.
Lower the presser foot, then loosen
the foot holder screw to place the
hem guide between the screw and
the shank of foot holder.
Tighten the screw making sure the
wall of hem guide is placed in the
middle of the toes of the presser foot.
Turn the power switch on.
Raise the presser foot and place the
fabric under the foot so that the soft
fold rests against the wall of hem
guide.
Lower the foot then stitch slowly for
better control so that the narrow
zigzag stitches fall on the hem
allowance and the wider zigzag
stitches pierce the soft fold. While
sewing, make sure the soft fold runs
along the wall of hem guide. Spread the fabric flat with the right
side facing up.