43
Applique
q
Stitch pattern:
29−32
w
Thread tension dial:
1 to 4
e
Presser foot:
Satin stitch foot F
r
Presser foot pressure dial: 3
Place an applique on the fabric and baste or pin it in
place.
Reduce the foot pressure to 3 (refer to page 8).
Lower the needle at the outer edge of the applique.
Sew while guiding the fabric so the needle falls along the
outer edge of the applique.
q
Applique
w
Outer edge
When turning a sharp corner, stop the machine with the
needle at the outer edge of the applique.
Raise the foot and pivot the fabric around the needle to
change the sewing direction.
• Adjusting the stitch width
Select pattern 29.
Press the stitch width adjusting key to change the stitch
width.
Press “–” to decrease the stitch width
r
.
Press “+” to increase the stitch width
t
.
The stitch width will be varied based on the centered
needle drop position
y
.
(A) The stitch pattern 32 has a fixed left needle drop
position. When you change the stitch width, the right
needle drop position will change.
(B) The stitch pattern 29 has a fixed center needle drop
position. The stitch width changes symmetrically.
(C) The stitch patterns 30 and 31 have a fixed right
needle drop position. When you change the stitch width,
the left needle drop position will change.
Shelltuck
q
Stitch pattern:
23
w
Thread tension dial: 6 to 8
e
Presser foot:
Satin stitch foot F
Use a lightweight fabric (tricot, for example).
Fold the fabric in bias as shown and stitch on the fold.
Allow the needle to barely clear the folded edge to create
a shelled edge.
q
Needle
w
Fold
If you sew rows of shell tuck, space the rows at least
1.5 cm (5/8˝) apart.
You can also sew shell tuck on knits or soft silky woven
fabrics, in any direction.
q
w
e
q
w
q
w
e
4
q
w
(A)
(B)
(C)
r
t
y
r
Содержание EX60
Страница 1: ...Instruction Book...
Страница 2: ......
Страница 59: ...55 Stitch Chart Stitch patterns shaded in light grey can be used for the twin needle sewing refer to page 49...
Страница 60: ...809 800 892 ENG...
