NEC VERSAPRO VG, Руководство пользователя, Страница: 17 / 32

17
2
Follow the steps below.
<For Windwos 8 .1>
Click on the start screen, and click [Run] on the application screen.
<For Windows 7>
Click [Start]

[All Programs]

[Accessories]

[Run].
3
Enter the following in the [Open] dialog and then click [OK].
<For Windows 8 .1>
D:\NECBATT\w81\UTL\setup.exe
<For Windows 7>
D:\NECBATT\w7\UTL\setup.exe
4
When [Welcome to the Battery tool Setup Wizard] is displayed, click [Next].
5
If the [Battery tool Files in Use] screen is displayed, click [NEC Battery
Tool-Scheduler (Process Id:XXXX)], and then click [Continue].
6
When the [Installation Complete] screen is displayed, click [Close].
7
When the restart prompt is displayed, remove the "Application Disc" from
the optical drive, follow the instructions on the screen, and then restart the
computer.
Following the above steps will complete the reinstallation of "Battery tool".
Data can be deleted from the computer's SSD.
Data written to the SSD can be removed using the [Recycle Bin] or by formatting the
computer to the original state.
Selecting this menu will remove SSD data that cannot be removed by SSD
formatting of operation system standard, and the removed data will not be easily
recovered with recovery tools. Format the SSD before transferring or disposing of
the computer.
Data can be deleted from the computer in the following 3 ways.
•
Simple mode (1 time erasure)
Overwrites "00" data entirely from the SSD.
• NSA-introduced mode ( 3 times erasure)
Deletes data from the SSD in a method compliant to the U.S. Department of
Defense NSA Standard. The data is deleted effectively by writing random data 1,
then random data 2, then "00" data 3 times in order and then deleting it 3 times.
However, since the data is written 3 times, it takes 3 times longer than simple
mode for deletion to be completed.
• DoD-introduced mode ( 3 times e Verify)
Deletes data from the SSD in a method compliant to the U.S. Department of
Defense Standard. "00", "FF", and "random value" is written in order, and verifies
that the final random data is written correctly. Effective deletion is performed by
deleting 3 times. However, since the data is written and verified 3 times, it takes 4
times or longer than when in simple mode.
By using this method it is not guaranteed that the data cannot be completely
recovered.
1
Turn the power on and immediately press <F2> key several times.
The BIOS setup utility will then be started.
2
When the BIOS setup utility is displayed, insert the "Recovery Disc 1" into
the optical drive.
3
Press the <F10> key.
4
Confirm that [Yes] is selected and then press <Enter>.
5
Turn on the power and immediately press <F2> key several times.
The BIOS setup utility will then be started.
If the optical drive is not specified as "D", change the "D" to the appropriate drive
specification.
If the prompt is not displayed, remove the "Application Disc" from the optical drive and
restart Windows.
Deleting Data from the SSD
The Recovery Disc is not included with model VC22T/GG-L.
About Deleting Data from the SSD
Before deleting the SSD data, return the BIOS Setup Utility setting to the factory
setting values.
How to Delete Data from the SSD
Remove peripheral devices (excluding the optical drive), return to the state at the time
of purchase.