NEC VersaDayLite, Руководство пользователя

Страница: 54 / 155

3-20 Using the BIOS Setup Utility
Identifying the Switch Settings
The following list identifies each switch setting and its function.
!
Switch 1 — Password override — The default setting is “OFF.” If you forget your
password and cannot access the data on your NEC Versa, change the setting to
“ON” and your current password is erased.
!
Switch 2 — Keyboard select; Default is “ON” for U.S. 86 key keyboard and “OFF”
for European keyboard.
!
Switch 3 — Not assigned; must be “OFF.”
!
Switch 4 — Keyboard select 2; Default is “ON” for US and “OFF” for European
keyboards.
!
Switch 5 — Reserved for factory use; Default is “ON.”
!
Switch 6 — Logo select; Default is “OFF.”
Default switch settings
Note
The system memory expansion slot is also located here. Therefore, if you
need to install/replace SO-DIMM modules, you might want to do so when the system is
already disassembled.
1.
Replace the memory module bay cover and screw.
2.
Turn over the system.
3.
Follow the instructions earlier in this chapter, “Performing the BIOS Update.”