NEC VersaBay IV 6-Cell Secondary Battery 3
Always install the weight-saving module that ships with your system in
the VersaBay IV slot if no VersaBay IV device is installed in the slot. See “Installing a Device in
the NEC VersaBay IV Slot” in your printed user’s guide for instructions on installing the module.
Installing the VersaBay IV Secondary Battery
Use the following steps to install the VersaBay IV 6-cell secondary battery.
1.
If you need to remove a device from the VersaBay IV slot, see “Removing a Device from
the VersaBay IV Slot,” earlier in this document.
For information on hot swapping or warm swapping devices, see the information about the
Phoenix BaySwap utility in your printed user’s guide.
2.
Locate the NEC VersaBay IV release latch to the right of the VersaBay IV slot.
3.
Flip the latch to the open position.
4.
Align the battery in the NEC VersaBay IV slot and push it in until it fits securely into the
bay.
Inserting the VersaBay IV secondary battery
5.
Press the latch back to the locked position.
6.
Press the Power button to power on.
