NEC Versa LXi Скачать руководство пользователя страница 152

Страница: 152 / 210

10-2 Solving System Problems

Problem Checklist

First check the items in the following list. If these items don't help, see the table that
follows the list.

The computer is powered on and the Power LED illuminates green.

The electrical outlet to which your AC adapter is connected is working. Test the
outlet by plugging in a lamp or other electrical device.

All cables are tightly connected.

The display setting is configured correctly.

The display brightness control is adjusted properly.

If using battery power, check that the battery pack is properly inserted and fully
charged.

Troubleshooting

Problem

Resolution

The system does not
power on.

If you are operating the system with battery power,
check that the battery pack is correctly inserted. Attach
the AC adapter to recharge the battery.

If you have the AC adapter attached, check that you
are using a working electrical outlet.

LCD screen is dark and
blank.

Power-saving mode has shut off the backlight. Press a
keyboard key or move the mouse.

The built-in LCD may not be selected. Press Fn-F3
once or twice to select the LCD video mode.

Screen brightness needs adjustment. Use the Fn-F8
and Fn-F9 functions keys.

The system entered Suspend (Windows NT) mode or
Standby (Windows 2000/98) mode due to low battery
power. Plug in the AC adapter or replace the battery
pack, and then press the Power button to resume
operation.

Battery power does not
last long.

Use power-saving modes.

Fully charge and discharge the battery several times to
recondition it.

Replace the battery.

Information on the LCD is
difficult to see.

Use the Fn-F8 and Fn-F9 functions keys to adjust the
brightness control.

Содержание Versa LXi



















































































































































































































Результаты поиска

Содержание Versa LXi

Отзывы:

Бренды по названию

Популярные бренды

NEC Versa LXi, Руководство пользователя

Результаты поиска

Содержание Versa LXi

Отзывы:

Бренды по названию

Популярные бренды