4 NEC Versa LXi Release Notes
However, if you choose to modify the color settings to 256 colors, from either the default or any other
color setting, video corruption may occur upon system restart. If video corruption occurs, it is
necessary to reboot your system a second time to eliminate the corruption.
Updating the IR (infrared) Driver
Before using IR data transfer on your NEC Versa LXi, be sure to install the latest IR driver, v3.08R,
from the Application and Driver CD.
Follow these steps to install the latest IR driver.
1.
Insert the Application and Driver CD into the CD-ROM drive.
If autorun is enabled, the CD automatically runs.
If autorun is not enabled, double click the CD-ROM icon in Windows Explorer to launch the
CD.
2.
Click the Drivers tab.
3.
Click on Latest Non-Logo'd IR Drivers.
4.
Highlight Installation Instructions.
5.
Click View.
6.
Print out and follow the on-screen instructions to install the latest IR driver.
Disabling Save-to-Disk
To optimize system performance when using a hard disk drive in the VersaBay III, disable the
Save-to-Disk parameter in the Power Management section of the BIOS Setup utility as follows.
1.
Press
F2
when booting the system to enter the BIOS Setup utility.
2.
Select Power Management Setup from the main menu.
3.
At the Power Management Setup menu, select Auto Save-to-File and set it to Disabled.
4.
Press
Esc
to return to the main menu.
5.
Select Save Settings and Exit.
Using PC Cards
Follow these guidelines when using PC cards on your NEC Versa LXi system.
After inserting a PC card into the PC card slot with the system powered on, the system
recognizes and loads the card driver. If the cursor toggles repeatedly between a pointer and
hourglass, click on the PC card icon on the lower right corner of the taskbar. Stop the PC card.
Eject and reinsert the PC card. The system loads the card and functions correctly.
When using PC storage cards with your NEC Versa LXi, do not change the default settings for
Power Button and Lid Close functions in Windows.
When using the Adaptec SlimSCSI PC card in the NEC Versa LXi, always have a device
attached to the card.
Do not swap PC cards between slots when the system is in Suspend mode.
