Disassembly/re-assembly instructions Easy Lite / Versa Lite
Packard Bell NEC Europe, version 1.0, 18-05-99, Page 10 of 13, MS
Removing the CPU Module
1- Carefully remove the two screws that secure the CPU module.
2- Disconnect the CPU holding clip that is fastened by a screw in the area marked by “B”.
3- Take out the module by disconnecting the two connectors under the module in the area
marked by “A”.
Removing the Memory Module (if applicable)
1- Pull the memory latches outwards to release the memory module and take it out.
