manualshive.com logo in svg

NEC VERSA FXI, Руководство пользователя

Поделиться
Скачать
NEC VERSA FXI Скачать руководство пользователя страница 111

6-10   Communicating with Your NEC Versa

Enabling/Disabling the IR Port in Windows 2000

The IR port on your NEC Versa FXi ships set to Auto. An icon appears on the taskbar
and provides access to the system’s infrared utility. If for any reason you want to
enabale (or disable) the IR port to reassign system resources, refer to the following
procedure.

Follows these steps to enable/disable the IR port in Windows 2000.

1. 

Go to Start, Setting, Control Panel, and double click the Wireless Link icon.

2. 

Select the Hardware tab and click the Properties button.

3. 

Select (or deselect) ‘Use the device (enable)’ in the device usage section of the
window.

4. 

Click OK, then click OK again to close the Wireless Link window.

Enabling/Disabling the IR Port Windows 98

The IR port on your NEC Versa FXi ships set to Auto. An icon appears on the taskbar
and provides access to the system’s infrared utility. If for any reason you want to
enable (or disable) the IR port to reassign system resources, refer to the following
procedure.

Follow these steps to enable/disable the IR port in Windows 98.

1. 

Right click the infrared icon, choose Enable Infrared Communication, highlight
Open to open the Infrared Monitor window, or go to Start, Settings, Control Panel,
and double click the infrared icon.

2. 

Select the Options tab and place (or remove) a check in the box labeled “Enable
infrared communication.”

3. 

Click Apply, then click OK to close the Infrared Monitor window.

Using the IR Port

Follow these guidelines when using the IR port to communicate with another infrared
device.

!

 

Position the NEC Versa FXi no more than three feet away from the IR peripheral
device you are using.

!

 

Make sure that there is no greater than a 30º angle between the computer and the
device.

Содержание VERSA FXI
























































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды