NEC VERSA FX, Инструкция по обслуживанию и справочник

Страница: 35 / 101

System Configuration and Setup 2-15
Power Management Setup
Your Versa FX system ships with the Windows 98 operating system that uses the Advanced
Configuration and Power Interface (ACPI) to control most power management functions
through the Power Management Properties screen in Windows. The BIOS Power Management
Setup screen is described next.
Note
In Windows 98, the term “Standby” is functionally the same as the term “Suspend” that
is referenced in the BIOS Setup utility.
Power Management Setup
Parameter Default
Setting Alternate Setting(s)
System Switch Power Button Sleep Button
Power Management
under AC Off On
Power Savings Level Longest Life High Perform/Custom/Off
CPU Speed Control
1
50% 12.5, 25, 100%
Hard Disk Timeout
1
2 minutes 5/30/45 sec; 1/4/6/8/10/15 min.
Off
Video Timeout
1
2 minutes 30/45 sec.; 1/4/6/8/10/15 min.
Off
Peripheral Timeout
1
On Off
Audio Device Timeout
1
On Off
Standby Timeout
1
4 minutes Off/1/2/6/8/10/15 min.
Auto Suspend Timeout
1
10 minutes Off/5/15/20/25/30 min.
LCD Suspend Disabled Enabled
Suspend Option Suspend STF
Auto Save-to-File Enabled Disabled
Panel Brightness Auto User Defined
Suspend Warning Tone Enabled Disabled
Remote Power On Enabled Disabled
Wake Up Alarm Disabled Enabled
Resume Alarm Time
2
Off Set time in 5 min. increments when
Wake Up Alarm is set.
1
Available when power savings is set to Custom
.
2
Resume alarm time is selectable when wake up from suspend alarm is set
.
!
System Switch — Sets the Power button as a power switch or a sleep button.
!
Power Management Under AC — Specifies whether to enable power management
features when AC power is in use. When AC power is connected to your NEC Versa
system, power management is usually disabled. If you enable this parameter, the system
automatically activates the power management profile you set, even when AC power is
used.