NEC Versa E3100, Руководство по разборке, Страница: 15 / 25

NEC VERSA E3100 Disassembly Manual
Page 15
Removing the LCD Panel
To remove the LCD panel, first remove the LCD module (see Removing the LCD Module ),
then perform the following steps:
1. Use a pin to remove the rubber cover on the LCD module as shown in Fig. 16
2. Remove all screws as shown in Fig. 16 and carefully remove the LCD cover.
Fig. 16 Removing the rubber covers & screws on the LCD Module
3. Remove the cables attached to the inverter board and slowly remove the inverter board as
shown on Fig 17. (The Inverter Board is still on the LCD back cover using double sided
tape)
Fig. 17 Removing the two cables and slowly pull up the inverter board
M2.5X6.5 Black