NEC VERSA 2200C, Руководство пользователя

Страница: 85 / 91

C-6 Modem Commands, Registers, and Codes
AT COMMANDS
COMMAND DESCRIPTION
&T5 Deny remote request for RDL test.
&T6 Initiate RDL test.
&T7 Initiate RDL test with self-test.
&T8 Initiate local analog loopback with self-test.
&V, &V0 View active configuration, profiles phone
numbers, and S register contents.
&W, &W0 Save active configuration as User Profile 0.
&W1 Save active configuration as User Profile 1.
&X, &X0
Modem source transmit clock.
&Y, &Y0
Recall User Profile 0 on power up.
&Y1 Recall User Profile 1 on power up.
&Zn=x
Store telephone number
x in directory entry n
(
n=0-3, x=36 characters maximum.)
For example, to store phone number (555)555-
5555, you enter AT&Z0=5555555555. This stores
the phone number in position 0. To dial the
number, issue the following command:
ATDS=0
\G0 Turn off Xon/Xoff software flow control. (See also
\Q3 hardware flow control).
\G1 Turn on Xon/Xoff software flow control.
\N0 Normal mode (non MNP, buffered data)
\N1 Direct mode (non MNP, data not buffered)
\N2 Reliable MNP mode (Attempts MNP connection;
if unsuccessful, then disconnects.)
\N3 Auto reliable mode (MNP if remote is MNP;
otherwise, normal.)
\N4 Reliable LAPM mode.
\N5 Auto-reliable LAPM and buffer mode.