NEC VERSA 2000 WINDOWS 98 - UPGRADE INFORMATION, Инструкция по обслуживанию и справочник

Страница: 43 / 82

NOTE: If a display related error occurs, it is
indicated by beeps. Display related errors usually
require a system board replacement.
SYSTEM PARAMETERS
The system uses Auto Setup to set and view system parameters. During POST, Auto Setup
detects current system parameters. Read the following subsections for specific uses and
procedures on setting system parameters.
Auto Setup
Auto Setup is a ROM-based program. It is functional when enabled (factory default). Auto
Setup automatically detects current system parameters during the power-on self-test. It also
provides the following functions:
!"
sets date and time
!"
signals any hardware discrepancies during POST via error messages
!"
identifies any parameter(s) changes by blinking double carets (>>)
!"
verifies optional memory installation
!"
integrates security features.
Accessing Auto Setup
Auto Setup is available at power-on:
!"
after POST displays the memory test. Press F1 when the cursor is a blinking
block.
!"
after the system password is entered (if set)
If there is an error at POST, press F1 to enter Auto Setup. Check that the hardware settings
match the present configuration.