NEC V850ES/Jx3-H, Руководство пользователя

Страница: 18 / 71

V850ES/Jx3H – Plug it!
3.12 USB1, serial interface connector
This interface allows connecting the IAR C-SPY debugger to the
V850ES/Jx3-H - Plug it! board
in order
to use the On-Board debug function. The interface supports On-board FLASH erasing / programming and
standard debug features like code execution, single stepping, breakpoints, memory manipulation etc.
The power supply of the
V850ES/Jx3-H - Plug it!
board is also provided by the USB1 connector.
1
5
Figure 4: USB1, USB Mini-B Type Host Connector Pin Configuration
Connector USB1 Signal Name
1 VBUS
2 D-
3 D+
4 ID_NC
5 GND
Table 6: Pin Configuration of Connector USB1
For connection with the host machine, use a USB cable (Mini-B type). For confirmation,
NEC Electronics used only the USB cable delivered with the
V850ES/Jx3-H - Plug it!
board.
3.13 USB2, universal serial bus connector
The interface allows connecting the built-in USB function controller of the
μ PD70F3760 with a host
system. It is also possible to provide the power supply of the
V850ES/Jx3-H - Plug it!
board by the
USB2 connector.
For connection with the host machine, use a USB cable (Mini-B type). For confirmation,
NEC Electronics used only the USB cable delivered with the
V850ES/Jx3-H - Plug it!
board.
User’s Manual U19647EE2V0UM00
18