NEC UNIVERGE UM8500, Руководство по интеграции, Страница: 76 / 352

UNIVERGE UM8500 I
NTEGRATION
G
UIDE
66
To enable the Last Party Clear Dial Tone
❚
On the phone system, enable the Last Party Clear Dial Tone option.
Otherwise, the voice messaging system detection is delayed when internal
calls are disconnected.
Mitel SX-2000
Perform the following to set up the voice messaging extensions, to assign key
numbers, and to set up the hunt group for the Mitel SX-2000 integration.
To set up the voice messaging extensions on the Mitel SX-
2000
1
From the Main menu on the phone system console, select
System forms
.
2
On the Systems Forms screen, select
DNI circuit assignment
.
3
On the DNI Circuit Assignment screen, set the
Device type channel #1
field to
Superset 430
for each voice messaging extension.
To assign key numbers on the Mitel SX-2000
1
From the Main menu on the phone system console, select
Multiline set
forms
.
2
On the Multiline Set Forms screen, select
Multiline key set assignment
.
3
On the Multiline Key Set Assignment screen, type a voice messaging
extension in the
Prime directory number
field.
4
Set the
Key numbers
field for the extension to
Not assigned
.
5
Repeat steps 3 through 4 for each voice messaging system port extension
number.
To set up the hunt group on the Mitel SX-2000
1
From the Main Menu on the phone system console, select
Group forms
.
2
On the Group Forms screen, select
Hunt group assignment
.
3
On the Hunt Group Assignment screen, in the
Pilot number
field, type the
published voice messaging number for all direct and forwarded calls, then
press
ESC+1
.