NEC UNIVERGE UM8500 Скачать руководство пользователя страница 106

Страница: 106 / 352

UNIVERGE UM8500 I

NTEGRATION

UIDE

Integration
overview

Use this section of the Integration Guide with the Installation Guide to set up the
messaging system for an IP integration with a Mitel 3300 ICP.

Integration steps

Follow these steps to set up this integration.

Review the system and equipment requirements.

Verify that all phone system and UM8500 server requirements have been met.
See “

Requirements

,” below.

Program the phone system and extensions.

See “

Programming the phone system

”

on page 98

Configure UM8500 for the integration.

See “

Configuring UNIVERGE UM8500 for the integration

”

on page 102

Requirements

The steps to set up the Mitel 3300 ICP with IP integration require the following:

Phone system

●

Mitel 3300 ICP with software version 5.2.6.8-1 or later installed.

●

Mitai/Tapi Computer integration.

●

One 3300ICP IP user license for each messaging port.

●

One 3300ICP IP user license for each IP phone.

●

The phone system ready for voice over IP integration as described in the
phone system installation guide.

●

All messaging ports and IP phones configured to use the G711 audio codec.

●

A network switch with enough ports to handle all IP phones, the voice server
and the phone system.

UNIVERGE UM8500 server

●

UNIVERGE UM8500 installed and ready for the integration as described in
the Installation Guide.

●

A system key that enables the integration and the appropriate number of
voice messaging ports.

●

A network cable to connect the voice server to the network containing the
phone system.

Содержание UNIVERGE UM8500

































































































































































































































































































































































Результаты поиска

Содержание UNIVERGE UM8500

Отзывы:

NEC UNIVERGE UM8500, Руководство по интеграции, Страница: 106 / 352

Результаты поиска

Содержание UNIVERGE UM8500

Отзывы: