NEC Univerge SV9100, Быстрая установка

Страница: 6 / 32

NEC SV9100 Communication System
6 Quick Install Guide
– UNIVERGE ST500 Mobile Client v1.0
3- SV9100 Configuration for UNIVERGE ST500 Mobile Clients
This Quick Install Guide will cover the UNIVERGE ST500 configuration. For other system configurations please
refer to the relevant SV9100 manuals.
You must have SV9100 PCPro installed to your laptop/PC, this can be downloaded from BusinessNet, refer to the
Quick Install Guide
– SV9100 PCPro.
Before you configure your system it is important that you:

Plan your requirements before you start.

Have sufficient EU901001 SV9100 NEC SIP Licenses installed for the required number of UNIVERGE
ST500 Mobile Clients.
While you configure your system it is advised that you:

Make a record of your configuration as you make each change.

Make small changes, upload to the SV9100 and test the changes. Avoid making all your changes at once
as this can make testing more difficult.
With the default/factory settings:

UNIVERGE ST500 Mobile Clients are not configured
UNIVERGE ST500 Mobile Client configuration is not included within the Initial Setup Wizard, use Easy Edit to
configure UNIVERGE ST500 Mobile Clients.
From Mandatory level view select
Applic ST500