NEC Univerge SV9100, Руководство пользователя

Страница: 554 / 766

Issue 2.0
SV9100 Networking Manual 10-67
Description
Use Program 51-05 : NetLink Timer Settings to set the various timers within the
NetLink system.
Conditions
None
Feature Cross Reference
None
Program 51 : NetLink Service
51-05 : NetLink Timer Settings
Level:
IN
Item
No.
Item Input Data Default
01 Keep Alive Sending Interval
This is the Keep Alive timer sending time from
the Secondary system to confirm
communication with the Primary system.
1~3600 5
02 Keep Alive Response Waiting Time
This is the time the Secondary system waits for
a response from the Primary system before
cutting off communication.
0, 5~10800
(0 = infinity) 0
03
Primary Search Packet Sending Interval
While searching the Primary system, the system
sends a packet at this interval.
1~3600
5
04 Primary Search Time Maximum Value
Total time of Primary system seek time.
5~10800 20
05 Top Priority Primary Detection Packet
Sending Interval
When current Primary system is not Top Priority
Primary System, the system sends packet to
check if Top Priority System exists.
1~3600 10
06
Primary Compulsion Specification Trial
Maximum Time
When the forced change Primary command is
executed, the system searches the new Primary
system for this time.
1~10800
30
07 Socket Refresh Time
For some reason, the IP connection may
become unstable. Then keep-alive function
does not work. To avoid this, if there is no data
traffic for this time, the socket is refreshed.
20~3600 40