NEC UNIVERGE SV9100 DT750, Руководство пользователя

Страница: 73 / 122

65
To Hold a Call
1. Press key to hold the call in progress.
To Transfer a Call
1. During a conversation, press key.
Receive Special Dial Tone. The first party is
placed on hold and hears the music on hold.
2. Dial the destination number. Receive Ringback
Tone.
3. Announce the call to the destination party.
4. Replace the handset. The transfer is complete.
To retrieve a held call, press the flashing Line key or ICM
key (Internal Calls).
The ICM key must be programmed on a Function key by
the System Administrator.
Calls on System Hold can be retrieved from any multiline
terminal with the held line appearance.
After a preprogrammed time, the held call will recall to
the originating station.
HOLD
HOLD
Held Station Number
VMsg
InPg ExPg

STA 12345678
2-13 WED 5:40PM
If the called station is busy, replace the handset to initiate
a camp-on. Unanswered camp-on calls and unscreened
transfers will recall to the transferring station
To return to the original party, press the flashing Line
key or Conf key.
A Programmable Function Key may be assigned for DSS.
To transfer a call directly to a personal mailbox, dial 8
after dialing the station number.
Transfer
HOLD
Held Station Number
VMsg InPg

STA 12345678
2-13 WED 5:40PM