NEC Univerge SV8100, Приложения

Страница: 89 / 184

SV8100 Issue 1.0
Desktop Applications 4 - 3
___________________________________________________________________________________
___________________________________________________________________________________
The Destination drop down list includes a list of the most recent transfer
destinations entered in this dialog box.
The actions associated with each of the dialog buttons are described in the
following sections.
1.3.1 Transfer Call – Start
When the Start button is selected, the software will initiate a
supervised transfer of the call. The Transfer dialog will be updated
(refer to
Figure 4-2 Transfer Call – Start ).
Selecting the Complete button will connect the original caller to the
destination and disconnect the user.
Selecting the Disconnect button will hang-up from the call to the
Destination, and reconnect to the original caller.
1.3.2 Transfer Call – Blind
When the Blind button is selected, the application will initiate an
unsupervised transfer to the specified destination.
Once the transfer is complete, the active call will be removed from the
active call area (Full Window and Toolbar modes).
1.3.3 Transfer Call – Cancel
When the Cancel button is selected, the transfer operation will be
cancelled and the Transfer dialog will be closed.
Pressing the Esc key will also initiate the Cancel operation.
1.4 Hang Up
The Hang Up button will disconnect the user from the active call.
When the active call is disconnected, the associated entry in the Active
Call list will be removed (Full Window and Toolbar modes).
Figure 4-2 Transfer Call – Start