NEC Univerge SV8100, Руководство пользователя

Страница: 30 / 32

© 2009 by NEC Taiwan
Delete IP Terminals
Delete IP Terminals
Delete IP Terminals
Delete IP Terminals
Registered IP Terminal can be deleted by programming.
1. Remove IP Terminal you want to delete from LAN port.
2. Enter PRG Mode and PRG90-23.
3. Key in the desired Extension Number and press “MIC” Key.
(Cursor shall move to lower line)
4. Dial “1” and press “Transfer” Key.
5. Exit from PRG Mode.
1. Enter PRG Mode and PRG15-02.
2. Key in the desired Extension Number and press “MIC” Key.
(Cursor shall move to lower line)
3. MAC Address is indicated “00-00-00-00-00-00”.
4. Exit from PRG Mode.
Note 1 : Remove IP Terminal before deleting operation by PRG90-23 otherwise the system will try
to re-register this IP Terminal.
Note 2 : After deleting IP Terminal and re-register later, the system might not provide same
Extension Number to this IP Terminal, if other IP Terminals has been registered.
To confirm delete status