NEC Univerge SV8100 VM8000 InMail, Системное руководство

Страница: 288 / 388

Issue 1.0 VM8000
3 - 2 Programming
2.1 VM8000 I
N
M
AIL
C
ONFIGURATION
The following programs must be configured in a default system to get VM8000
InMail functions.
1. The VM8000 InMail blade is enabled.
47-01-17 VM8000 InMail Port
This option is used to set the first port of VM8000 InMail. This value
can be any valid station port not already in use. By default this option
is not assigned. Changing this option requires the CHS2U GW-US
be reset for changes to take effect.
2. Assign VM8000 InMail extensions to Department Group.
16-02-01 Department Group Assignment for Extensions
Assign the VM8000 InMail extensions to a unique Department Group
(e.g., 2).
No other extensions should be in this group.
These extensions are the extensions the system assigns to the
In-Mail.
Do not use Department Group 1.
3. Be sure to set up the Department Group in order. (For example, the first
extension should be order 1, the second order 2, etc.)
Assign master
number to VM8000 InMail Department Group.
11-07-01 Department Group Pilot Numbers
4. Define the Voice Mail Department Group.
45-01-01 Voice Mail Integration Options – Voice Mail Department Group
Number
5. Set extensions 101-108 to use the Message key for Voice Mail
operation.
15-02-26 Multiline Telephone Basic Data Setup – Message Key Operation
Mode
This option is 0 for all extensions.
No Voice Mail Programmable Function Keys are assigned (15-07-01
Programming Function Keys does not = 77 for any extensions).
6. Mailboxes for extensions 101~108 are activated.
47-02-01 VM8000 InMail Station Mailbox Options – Mailbox Active
This option is 1 for extensions 101~108.
When activating additional mailboxes, Subscriber Mailboxes 1~26
normally correspond to extensions 101~126.