NEC UNIVERGE DT700, Руководство пользователя

Страница: 264 / 382

D T 7 3 0 G C O L O R M I C R O B R O W S E R A N D E N H A N C E D P R O G R A M M A B L E K E Y S
Enhanced Programmable Keys
10-246
DT700 Phone User Guide
Note:
The default type of transfer (blind or consult) for this key is controlled by your
system administrator.
To pickup a held call from a member of your workgroup
When another user has a call on hold, you will see a red flashing LED for that user.
•
While your phone is idle and the other workgroup member’s phone has a held call, do
one of the following:
• To place a hands-free or headset call : Press the key for the workgroup
member, then use your headset or the phone’s speaker to continue the call on
your phone.
• To use your phone handset for the call : Pick up your phone handset, then
press the key for the workgroup member to pick up the call from that address.
M U L T I - P R E S S B E H A V I O R
To place a call to a member of your workgroup
You can use a programmed key to place calls to other workgroup members.
•
While your phone and the other workgroup member’s phone is idle, do one of the
following:
To place a hands-free or headset call :
1
Press the key for the workgroup member you want to call.
An outbound call is made to the workgroup member.
2
Use your headset or the phone’s speaker to continue the call on your phone.
To use your phone handset for the call :
1
Pick up your phone handset.
2
Press the key for the workgroup member.
An outbound call is made to the workgroup member.
3
Continue the call on your phone.
Non-idle call states:
• If you are on a call, you will see a screen that gives you the option to Blind transfer
your currently held call to that workgroup member.
Note:
If you actually want to place an attended/consult transfer call rather than a
Blind transfer call, press the Transfer key on your phoneset. Once an
attended/consult transfer is started, use the Transfer key on the phoneset to
complete the transfer.
Figure 10.32 Transfer Key