NEC TT820e, Руководство пользователя

Страница: 18 / 36

DISPLAYING YOUR OWN NUMBER
1) Press MEM + 0 + 0.
PWR
P-1 2 1 4
1 2 3 - 4 5 6 7
Note: If your phone is registered on two cellular net-
works, the number displayed will be for the network
that is currently being used. P1 is NAM1, P2 is NAM2.
NAM SELECT
1) Press FCN + 6.
2) Press 6 to change.
PWR PWR
P-1 2 1 4 P-2 2 1 4
1 2 3 - 4 5 6 7 2 3 4 - 5 6 7 8
Note: If only one NAM has been programmed, FCN + 6
will not operate. Error tone will sound.
LOCKING/UNLOCKING THE PHONE
Your phone has a simple security system. It can be locked
by using a four-digit or three-digit lock code to prevent
unauthorized use.
The lock code is supplied by the dealer. If you forget
your lock code contact your dealer. The factory
default lock code is 0000.
FULL LOCK
When the phone is fully locked, only emergency calls (911)
can be made, but any call can be received. Storing to the
memory is also prevented.
1) Press FCN + #. The display will read:
PWR
E n t E r C d
2) Enter 4-digit lock code. If you key in the correct code, FL
(Full Lock) will appear in the upper right corner of the dis-
play. If the key is incorrect the display will go back to
the standby mode.
PWR PWR
o o o o FL o o o o
CORRECT INCORRECT
Note: For security the display will not show the 4-digit
lock code
-11-